Step up DC booster voltage module
Input voltage range 2 to 24 volts DC
Output voltage range 2 to approximately 30 volts
Maximum peek current of 2 amps
Ultra small footprint
Simple output adjustment
Dimensions 16mm wide, 22mm long, 12mm high
Instructions
£2.79
20 in stock
Step up DC booster voltage module
Input voltage range 2 to 24 volts DC
Output voltage range 2 to approximately 30 volts
Maximum peek current of 2 amps
Ultra small footprint
Simple output adjustment
Dimensions 16mm wide, 22mm long, 12mm high
Instructions
| Weight | 3 kg |
|---|
Our adjustable step up voltage booster module can deliver a lot of power for it’s small footprint. Measuring just 22mm x 16mm, the unit has a maximum peek output current of 2 amps.
The input voltage range is 2 to 24 volts, the output voltage range is 2 to approximately 30 volts. Note that the minimum output voltage is equal to the input voltage (i.e. if the input is 12 volts then the minimum output voltage is also 12 volts) however the output voltage may be raised up to the maximum (approximately 30 volts).
The output is adjusted by a multi turn preset, turning the preset anti-clockwise increases the output voltage, clockwise reduces the output voltage.
To keep the size as small as possible, this module does not have connectors for the input and output wiring, these connections need to be soldered from either the top or the bottom of the board.
The module has short circuit and over heating protection.
