SPST ON - OFF Single pole PACK OF TEN

This type of switch is ideal for isolating or controlling power routing in sections of track, or any simple on-off dolls house lighting switching operation.
Also has many other general purpose uses ie lighting and signals control etc
Mounting hole size = 6mm
Switch body size = 13mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 5a - 125v or 3a - 250v ac
These are panel mounting switches, and are supplied complete with
2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

SPST ON - ON PACK OF TEN

This type of switch is ideal for many general purpose uses ie power, lighting and signals control.

Mounting hole size = 6mm
Switch body size = 13mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 3A 120V AC / 28V DC / 1.5A 250V AC
These are panel mounting switches, and are supplied complete with
2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

SPDT (ON) OFF (ON) note: (ON) = momentary biased PACK OF TEN

Momentary means once the switch is released it reverts back to the center off position.
This makes them ideal for the operation of solenoid point motors.
Also has many other general purpose uses where only a brief switching period is required.

Mounting hole size = 6mm
Switch body size = 13mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 5a - 125v or 3a - 250v ac

These are panel mounting switches, and are supplied complete with
2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

DPDT ON OFF ON PACK OF TEN

This type of switch is ideal for many general purpose uses ie power, lighting and signals control.

Mounting hole size = 6mm
Switch body size = 13mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 5a - 125v or 3a - 250v ac

These are panel mounting switches, and are supplied complete with
2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

DPST (ON) OFF (ON) note: (ON) = momentary biased PACK OF TEN

Momentary means once the switch is released it reverts back to the center off position.
This makes them ideal for the operation of solenoid point motors.
Also has many other general purpose uses where only a brief switching period is required.

Mounting hole size = 6mm
Switch body size = 13mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 5a - 125v or 3a - 250v ac

These are panel mounting switches, and are supplied complete with
2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

DPST ON - ON PACK OF TEN

This type of switch is ideal for many general purpose uses ie power, lighting and signals control.

Mounting hole size = 6mm
Switch body size = 13mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 3A 120V AC / 28V DC / 1.5A 250V AC

These are panel mounting switches, and are supplied complete with
2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

3PDT ON - OFF - ON PACK OF FIVE
The switch has Tripple on-off-on configuration.
This type of switch is ideal for isolating or controlling power in sections of track.
Also has many other general purpose uses ie lighting and signals control etc.

Mounting hole size = 6mm
Switch body size = 13mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 3A 120V AC / 28V DC / 1.5A 250V AC
These are panel mounting switches, and are supplied complete with 2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

3PST ON - ON PACK OF FIVE
The switch has Tripple on-off-on configuration.
This type of switch is ideal for isolating or controlling power in sections of track.
Also has many other general purpose uses ie lighting and signals control etc.

Mounting hole size = 6mm
Switch body size = 13mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 3A 120V AC / 28V DC / 1.5A 250V AC

These are panel mounting switches, and are supplied complete with 2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

4PDT ON - OFF - ON PACK OF FIVE
The switch has Quad on-off-on configuration.
This type of switch is ideal for isolating or controlling power in sections of track.
Also has many other general purpose uses ie lighting and signals control etc.

Mounting hole size = 6mm
Switch body size = 22mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 3A 120V AC / 28V DC / 1.5A 250V AC
These are panel mounting switches, and are supplied complete with 2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

4PDT ON - OFF - ON PACK OF FIVE
The switch has Quad on-on configuration.
This type of switch is ideal for isolating or controlling power in sections of track.
Also has many other general purpose uses ie lighting and signals control etc.

Mounting hole size = 6mm
Switch body size = 22mm x 13mm including solder lugs
Switch toggle lenth = 11mm
Contact rating 3A 120V AC / 28V DC / 1.5A 250V AC
These are panel mounting switches, and are supplied complete with 2 x nuts & locking washers

Pre-wired Spade Terminals for use with this switch CLICK HERE

### First Class Postage with this Item ###

DPDT ON-ON Double Pole Double Throw

Material: Alkyd base (UL flame: 94V-0) for high insulation.
Covered in Stainless steel for corrosion resistance.
Contacts and terminals are Copper
with Silver alloy and Silver plated.
Epoxy sealed for dust and moisture resistant.

### First Class Postage with this Item ###

SPDT (ON) OFF ON Single Pole
( ON ) = MOMENTARY BIASED
Which means once the switch is released it will return back
to its center postion (off).
Due to its momentary action, this type of switch is ideal for
controlling Model Railway points motors.

Material: Alkyd base (UL flame: 94V-0) for high insulation.
Covered in Stainless steel for corrosion resistance.
Contacts and terminals are Copper
with Silver alloy and Silver plated.
Epoxy sealed for dust and moisture resistant.

### First Class Postage with this Item ###

SPDT (ON) OFF (ON) Single Pole Double Throw
( ON ) = MOMENTARY BIASED
Which means once the switch is released it will return back
to its center postion (off).
Material: Alkyd base (UL flame: 94V-0) for high insulation.
Covered in Stainless steel for corrosion resistance.
Contacts and terminals are Copper
with Silver alloy and Silver plated.
Epoxy sealed for dust and moisture resistant.

### First Class Postage with this Item ###

DPDT ON-OFF-ON Double Pole Double Throw

These switches are for panel mounting and have nuts & washers supplied

Material: Alkyd base (UL flame: 94V-0) for high insulation.
Covered in Stainless steel for corrosion resistance.
Contacts and terminals are Copper
with Silver alloy and Silver plated.
Epoxy sealed for dust and moisture resistant.

### First Class Postage with this Item ###

SPST OFF-ON Single Throw

These switches are for panel mounting and have nuts & washers supplied

Material: Alkyd base (UL flame: 94V-0) for high insulation.
Covered in Stainless steel for corrosion resistance.
Contacts and terminals are Copper
with Silver alloy and Silver plated.
Epoxy sealed for dust and moisture resistant.

### First Class Postage with this Item ###

SPDT ON-OFF-ON Single pole Double Throw
Centre (off)
These switches are for panel mounting and have nuts & washers supplied

Material: Alkyd base (UL flame: 94V-0) for high insulation.
Covered in Stainless steel for corrosion resistance.
Contacts and terminals are Copper
with Silver alloy and Silver plated.
Epoxy sealed for dust and moisture resistant.

### First Class Postage with this Item ###

SPDT ON-ON Single Pole Double Throw

These switches are for panel mounting and have nuts & washers supplied

Material: Alkyd base (UL flame: 94V-0) for high insulation.
Covered in Stainless steel for corrosion resistance.
Contacts and terminals are Copper
with Silver alloy and Silver plated.
Epoxy sealed for dust and moisture resistant.

### First Class Postage with this Item ###