Model Railway Remote Control for Trackside and Building Lighting

You are here: Micro Miniatures | Model Railways | Model Railway Remote Control for Trackside and Building Lighting


Remote Control Information

What size of Remote Control do I need for my layout

This will depend on what lighting you currently have, and what you may be adding. As a quickguide:

The low power version can be used with up to 48 50ma bulbs or approx 100 LED's
The medium power version can be used with up to 96 50ma bulbs or approx 200 LED's
And the high power version can power 144 50ma bulbs or approx 300 LED's

What is a 50ma Bulb? Well its almost the joe soap of the modellers 12volt bulb world.
However:
Many of the grain of wheat bulbs or the grain of rice types are only 30ma.
This means that our Low Power remote control would be able to power
72 bulbs of this type

New PWM Software Correctly Dims LED's

Need some advise then give us a call.

Remote Control 24 independent output channels (low power)

Ref: RIRLP

Remote Control 24 independent output channels (low power)
Price: 61.22   (Inc. VAT at 20%)

Quantity:

Product Details
Click image for larger veiw

Infra-red remote controller with 24 outputs.
Each output can power 2 bulbs @ 50ma (2x24=48 total)

This Remote Control requires a 12 DC power supply.
The power supply must be able to supply 2.5amps.

More Details...

24 Outputs each of which can power 2 x 50ma type bulbs.
This version can be used with up to 48 50ma bulbs or approx 100 LED's
Features include, individual off/on of all 24 outputs.
You have full individual dimming of each of the 24 outputs. Which is great for atmosphere within buildings.
There is a save key, which stores all settings in internal memory, so after turning the remote controller off, it will remember all of your railway layouts bulb settings, (off/on/dimmed). When next turned on the lights are restored as previously set.
The controller also has an master all lights on and all lights off feature, and master dimmer.
You can also program blocks of lights, for example 1 key could turn on a entire section of
building or perhaps a platform and its building. The permutations are endless.

New PWM Software Correctly Dims LED's

Supplied with remote control handset, infrared receiver, full setup and operating instructions.

### Dispatched by First Class Post ###

Remote Control 24 independent output channels (medium power)

Ref: RIRMP

Remote Control 24 independent output channels (medium power)
Price: 81.65   (Inc. VAT at 20%)

Quantity:

Product Details
Click image for larger veiw

Infra-red remote controller with 24 outputs.
Each output can power 4 bulbs @ 50ma (4x24=96 total)

This Remote Control requires a 12 DC power supply.
The power supply must be able to supply 5amps.

More Details...

24 Outputs each of which can power 4 x 50ma type bulbs.
This version can be used with up to 96 50ma bulbs or approx 200 LED's
Features include, individual off/on of all 24 outputs.
You have full individual dimming of each of the 24 outputs. Which is great for atmosphere within buildings.
There is a save key, which stores all settings in internal memory, so after turning the remote controller off, it will remember all of your railway layouts bulb settings, (off/on/dimmed). When next turned on the lights are restored as previously set.
The controller also has an master all lights on and all lights off feature, and master dimmer.
You can also program blocks of lights, for example 1 key could turn on a entire section of
building or perhaps a platform and its building. The permutations are endless.

New PWM Software Correctly Dims LED's

Supplied with remote control handset, infrared receiver, full setup and operating instructions.

### Dispatched by First Class Post ###

Remote Control 24 independent output channels (high power)

Ref: RIRHP

Remote Control 24 independent output channels (high power)
Price: 102.12   (Inc. VAT at 20%)

Quantity:

Product Details
Click image for larger veiw

Infra-red remote controller with 24 outputs.
Each output can power 6 bulbs @50ma (6x24=144 total)

This Remote Control requires a 12 DC power supply.
The power supply must be able to supply 7amps.

More Details...

24 Outputs each of which can power 6 x 50ma type bulbs.
This version can be used with up to 144 50ma bulbs or approx 300 LED's
Features include, individual off/on of all 24 outputs.
You have full individual dimming of each of the 24 outputs. Which is great for atmosphere within buildings.
There is a save key, which stores all settings in internal memory, so after turning the remote controller off, it will remember all of your railway layouts bulb settings, (off/on/dimmed). When next turned on the lights are restored as previously set.
The controller also has an master all lights on and all lights off feature, and master dimmer.
You can also program blocks of lights, for example 1 key could turn on a entire section of
building or perhaps a platform and its building. The permutations are endless.

New PWM Software Correctly Dims LED's

Supplied with remote control handset, infrared receiver, full setup and operating instructions.

### Dispatched by First Class Post ###

You are here: Micro Miniatures | Model Railways | Model Railway Remote Control for Trackside and Building Lighting