| |
| | If you have a question relating to any of our products or require any help or guidance please email the address below. |
| |
| | info AT microminiatures.co.uk (this is not a live link due to email address harvesting) |
| |
| | We will then post them here, With hopfully the answer |
| |
| | |
| |
| | Q: Infra-red remote points controller |
| | Am I right in assuming that the second output for led,s could be used for signals and they would change
when the points are changed. |
| | A: Yes, the second LED output could be used for signals. But as the output is only 5 volts there could be some
voltage loses over long wire lenghts. (over 1 metre) |
| |
| | Q: 24 channell Infra-red remote control model IRMP |
| | Hi, you say in the description that this can do 4 lights per room. In one of my rooms there are 7
lights (a kitchen). Obviously they wouldn't all be on at the same time but would I still be able to
use this remote control. Is there a way round this? . |
| | A: You could put 4 of the lights on one output, for example output No 1.
Then the other 3 on output No 2. (This would use 2 of the 24 outputs).
Or 2 lights on output No 1, 2 on output No 2 2 on output No 3 and 1 on output No 4.
(This would use 4 of the 24 outputs). |
| |
| | |
| |
